Have you experienced cannabis seed germination issues and wondered what is the most reliable seed germination method? Read on for expert tips and advice. Check out our article on Reasons Cannabis Seeds don't Sprout. Click for more Grow at Home information from I49 Seed Bank. Weed seeds for sale online in the USA. 1-888-441-4949
Top 10 germination and seedling mistakes
Most seed germination issues can be sourced back to the germination method. This is an area where Dutch Passion have extensive expertise and can offer accurate, professional advice for seed germination issues.
Dutch Passion have been helping growers with their cannabis seed requirements since the 1980’s. Few in the seed business can claim more experience. Many of the early problems that growers deal with involve issues with germination of the cannabis seeds and subsequent growth of the seedlings.
Below are the 10 cannabis seed germination topics which generate the most feedback and questions from growers. Hopefully you will learn something which can improve the success of your future grows.
1. Watering too much, or too little… or both!
Perhaps the most common seed germination issues are related to the amount of water (and the germination technique) used to produce seed germination. A lot of cannabis seed germination issues are caused when the seeds are overwatered and soaked. Soaking seeds, or giving them an environment with too much water, causes seeds to stagnate and stop developing.
Soaking cannabis seeds causes them to stagnate.
When a cannabis seed germinates, a small white root will emerge. However, if the cannabis seed is soaked for too long in waterlogged conditions the root will stop growing and eventually start to rot. An indication of root rot is a brown colouration on the root or the root tip. Cannabis roots need oxygen as well as moisture to thrive. But if the roots are soaked for too long, there is insufficient oxygen for root health to be maintained and root rot can begin.
Conversely, seed germination issues are also seen when the cannabis seed dries out due to insufficient moisture. This can happen when growers try to germinate their seeds between moist cotton pads but forget to put them in a sealed container e.g a dinner plate sealed with some transparent kitchen film.
Without moisture, the cannabis root simply dries out and dies. Under high magnification you will notice that the tap root is covered with numerous delicate root hairs. These will dry out and die unless the root is kept in moist (but never soaked) conditions. You will notice the cannabis root turning brown. Just as with an over-watered seed, once the root is showing discolouration and dying it is often damaged beyond repair.
Soaked cotton pads, saturated tissues or even waterlogged soil in a closed container all show the same issue when soaked. Soaked seeds won’t develop roots at all or they will stop their development.
So make sure your environment is moist but never soaked, and give your feminised seeds and autoflower seeds the best chance to germinate. Note that there are no differences in the techniques used to germinate feminised seeds and autoflower seeds, the same germination methods are used.
It’s also worth adding that the appearance of a cannabis seed (colour, size, shape etc) won’t have any influence on the speed of germination.
|Everything you need to know about cannabis roots
What does the appearance of a cannabis seed indicate?
How much water should I use for a successful germination?
If you are germinating your cannabis seeds between lightly sprayed cotton pads, the pads only need 5 short sprays to moisten them. Remember, the key principle is to provide a healthy environment with both moisture and some air. If you try to germinate your cannabis seeds in a water-saturated environment for too long the roots will simply rot. It doesn’t matter whether that environment is cotton pads, soil or any other material. Moist conditions will work, but sodden/saturated conditions will eventually cause the root to rot and die.
One of the most reliable ways to germinate cannabis seeds is simply to place them between two cotton pads which have been lightly sprayed 5 times with water. Just leave the pads for a couple of days in a sealed environment so that the cotton pads don’t dry out. The golden rule is to spray the pads lightly. Cannabis seeds thrive in moist conditions but can die quickly in soaked conditions
|Cotton Pad germination video tutorial
Soil germination video tutorial
How long for germination of weed seeds?
Usually it takes somewhere between a couple of days to a week for your cannabis seeds to germinate. Occasionally seeds can take a couple of weeks. To avoid seed germination issues, remember the important basic principle for cannabis seeds; offer an environment which balances moisture with some aeration for root development. Therefore, germinating your seeds in a light soil mix will give better results than a heavy clay-based soil.
How often to water weed seedlings? / When and how much water to give to cannabis seedlings?
Watering should be offered only to keep the soil moist and prevent it from drying out. Remember that the small cannabis root (often called a tap root) will need to absorb very little moisture initially. The main focus is to allow the root to develop through a light, aerated grow medium which doesn’t obstruct the root growth, not should it allow the root to dry out.
2. Germinating cannabis seeds outdoors
Many people love to germinate their cannabis seeds outdoors, especially outdoor/greenhouse growers. Why not? That’s the way that seeds have evolved over millions of years to germinate. However, it’s worth noting that in nature a plant can produce hundred/thousands of seeds but only need a few of them to make it past germination in order for the next generation to survive. Cannabis growers, on the other hand, like to see germination rates of 90%-100%, especially if they have bought premium cannabis seeds for their specific requirements and grow location.
However, outdoor growers can struggle to achieve good germination rates if they rely on outdoor seed germination. Conditions can fluctuate dramatically, especially during the unpredictable early season weather.
Temperatures and/or weather can swing significantly between night and day, reducing germination rates and killing weaker seedlings. If the weather is cold and wet with persistent rain, the seeds may simply rot in the ground and never emerge. Even if they do, slugs/snails/birds may get to the seedlings before you do.
If the early season weather produces a heat wave, your seeds may dry out if the roots haven’t been able to reach deep enough for moisture. Germinating cannabis seeds outdoors may work for some seeds, but it’s not recommended for the highest germination rates.
Those that germinate cannabis seeds outdoors in containers may find that the containers get very hot in direct sunlight – especially dark/black coloured containers which absorb the suns heat. Temperatures around (or above) 35ºC/95ºF can kill the seeds/seedlings through excessive heat. That’s why many successful outdoor cannabis growers prefer to germinate their cannabis seeds indoors where conditions can be opted to minimise seed germination issues.
What is the best temperature for germinating cannabis seeds?
The temperatures found in an average house, 20ºC – 25ºC are perfect for cannabis seed germination.
Many serious outdoor growers germinate their seeds indoors to maximise germination rates and then perhaps grow their seedlings indoors under artificial light for a couple of weeks to give them the best possible start before risking them in the great outdoors. It’s the best way to avoid seed germination issues and ensure the maximum number of your precious cannabis seeds make it into healthy adult plants.
|Outdoor cannabis seed collection from Dutch Passion
Best ways to grow cannabis outdoors
3. Overheating seedlings with heating mats
For good cannabis seed germination rates you need both moisture and warmth. Seeds which might germinate at ambient indoor temperatures in summer may not germinate quite so easily in winter in a cold part of your house. Sometimes during the cooler months, the indoor temperature may need a small boost. That’s why many growers use an electrically powered, plug-in heating mat. This can be set to a specific temperature to provide the warmth required to avoid seed germination issues.
Overheating cannabis seeds will slowly cook and destroy your seedlings.
The plant pots, or propagator, simply sit on top of the heat mat. These can be a great solution for cold periods in winter. However the Dutch Passion team have come across cases where heat mats are used all year round. In summer, this is unnecessary and can result in overheated plant containers and seeds which have been damaged/destroyed by the high temperature.
When indoor temperatures are already 20-25 ºC there is no reason to risk adding extra heat, especially if it can’t escape. The danger is overheated soil and sterilised seeds. In combination with excess moisture/excess water, cannabis seeds and the delicate tissues inside are slowly cooked and destroyed. This can occur if the excess heat from the mat can’t escape and builds up in the plant containers over time.
Should I use a heating mat for germination?
Yes you can, but use them during colder periods such as winter time. You may also wish to use a thermometer to confirm that temperatures are being maintained within the preferred 20-25ºC range.
What temperature should I put my heating mat on?
Because heat can build up in soil or in a propagator, be sure not to set the temperature too high. Temperature settings of around 20-22 degrees should ensure a nice warm environment, without risking overheating.
4. Fertilising cannabis seedlings incorrectly
When seedlings first sprout they are very sensitive to their growing environment. Strong light at close range will damage their delicate leaf tissues easily. Temperature extremes and large temperature swings/cold nights can also be fatal to them. That is why you have to be careful growing your seedlings in the first 1-2 weeks.
A common mistake seen by the Dutch Passion customer service team is excessive nutrition/fertiliser being given to seedlings. Cannabis growers often use a wide variety of nutrients/fertilisers to grow their plants. Sometimes they make the mistake of adding a lot of these during the first stages of growing. In the worst cases, this can permanently stunt growth, or kill the plant.
Seedlings and their delicate root systems can’t handle a nutrient rich environment very well. Nor were they designed to. The seedlings have everything they need for a healthy initial germination and development inside the seed itself. That is how nature made them. So when seeds first sprout, they don’t need any fertilizer at all!
When to start using nutrients with germinated cannabis seeds?
Many growers prefer not to add any fertilizer or additives during the first week of growth. Your seedling will not need it at this time, and will only be damaged if exposed to an excess of nutrients or fertilizer. If you are growing in a good quality soil, you may not need to add any extra nutrients for a week or two. Even then, you should only consider weak/starter nutrients and slowly build up concentrations.
5. Germinating seeds in jiffy pods, coffee filters and rockwool cubes
Of all methods used for germination, these methods are the ones that give the most issues and are often done incorrectly. This is backed up from customer feedback and the 30+ years of experience from the Dutch Passion customer service team. During the decades of seed supply, Dutch Passion (and their customers) have accumulated extensive experience of which cannabis seed germination methods are safe to use, and which are best to avoid.
Of course, many growers will argue that these methods have always worked well for them. But that doesn’t mean that the methods are completely bullet-proof with a wide working latitude for everyone.
Some growers find that cannabis seed germination in jiffy pods work pretty well. The main concern for the Dutch Passion team is that these methods are not quite as bullet-proof with the same wide-latitude as the preferred method of germinating cannabis seeds between moist cotton pads.
Experience from the Dutch Passion team is that there are many ways to incorrectly perform cannabis seed germination with jiffy pods, coffee filters and rock wool cubes. You may be better off using a safer, less troublesome method with a wider working latitude and reduced risk of getting it wrong. Therefore Dutch Passion recommend customers not to use them.
What is wrong with germinating seeds in Jiffy pods?
Water has to be added to jiffy pods in order to use them. The Dutch Passion team have seen many cases where growers completely soaked the jiffies before use. Other growers will even stand the jiffy pods in a shallow tray of water while seeds are germinating in them. In the worst cases, this results in a soaked environment in which cannabis seeds won’t germinate (or with reduced germination rates).
Jiffy seed pods work well for larger seeds e.g. beans, where there is less to go wrong. But for cannabis seeds there can be seed germination issues when used incorrectly and for that reason Jiffy pods are not recommended.
What is wrong with germinating seeds Rock wool cubes?
Rock wool cubes are sometimes used for germination, but perhaps they are used more often for creating clones and allowing cuttings to develop new roots. For that purpose they work well. When used for germination, however, the same issues can occur as with the jiffies. Overwatering, overheating or placing the seeds too deep in the rock wool (glasswool) cube can cause seed germination issues for less experienced growers. Therefore rock wool cubes are not preferred if you’re looking for a low risk method for germinating your autoflower seeds or feminised seeds.
What is wrong with germinating cannabis seeds in coffee filters?
One of the more unusual and unwieldy methods for cannabis seed germination is the use of coffee filters. The seed tip is placed pointing downwards inside a wet coffee filter, inside a large sealed bag. This is often hung from a hanger against a door or inside a closet. The idea is that the roots grow downwards by hanging them vertically.
Along with many things that can go wrong with this method, we feel it’s unnecessarily complicated, gravity will always make sure roots find their way down anyway. Therefore we do not recommend customers to use it. One of the main risks is that the coffee filter will hold too much water and soak the seeds, causing root rot.
What methods work best for germinating cannabis seeds?
There are a lot of methods that can be used, but some have higher margins for errors. The methods may work fine for others but not necessarily you e.g. due to too much water being present at the root level. One of the most common cannabis seed germination methods is still the moist cotton pad method (or moist kitchen tissue). Customers are free to use a method which works best for them. However the Dutch Passion team feel that there are less things to go wrong, and maximum chances of success with the moist cotton pad method.
Is soaking seeds in a glass of water a good germination method?
As previously mentioned, cannabis seeds like a moist environment but do not perform well in soaked/saturated one. When they are exposed to a soaked environment e.g. several days in a glass of water, you may experience seed germination issues. This is especially the case when the seed is left soaking for long periods.
Many people soak their seeds in a glass of water for a day before putting them on moist cotton pads or moist kitchen tissue. The Dutch Passion customer service team feel that this is an unnecessary step. Seeds will absorb moisture from water or cotton pads in just the same way without the risk of root rot associated with over-soaking your seeds.
If you are planning to germinate your cannabis seeds in soil and wish to soak them in a glass of water first, we advise to soak them for no longer than 12 hours.
6. Damping off cannabis seedlings
‘Damping off’ is a disease which affects seedlings. It is caused by several different fungi (and fungus-like) organisms. This disease causes a thin stem which is unable to support the emerging seedling. The result is that the seedlings collapse, often under a white mass of fungal growth.
Damping off is most common in young seedlings and can be caused by overwatering your soil. It also happens when you use contaminated soil, e.g. from your back garden. The fungi Rhizoctonia and Fusarium, alongside Pythium plant parasites are the most common pathogens responsible for damping off. Note that Pythium is often transported around on the feet of fungus gnats, which can be a common pest in soils made with composted wood.
Once your seedling starts suffering from damping off, there is little you can do to save it.
How to avoid damping off my seedlings?
If you use fresh soil, and make sure you don’t overwater it, there should be little risk of damping off. Once plants have mature leaves and a well developed root system, they are better able to naturally resist the fungus that causes damping off.
7. Stretching seedlings caused by lack of light
After your cannabis seeds have successfully germinated it’s time to provide good care for your seedlings. This includes light, one of the most important factors for healthy plant development. Once your seedlings have sprouted it’s important to provide it with good quality lighting, either natural sunlight or an artificial indoor grow light. If the lighting is too powerful, it can kill a vulnerable new seedling. Some growers like to use specially designed ‘T5’ fluorescent tubes for cultivating seedlings, or perhaps some LED light bars designed for seedlings.
Stretching cannabis seedlings due to insufficient lighting.
But if the lighting is of an insufficient strength, the seedlings will ‘stretch’ upwards in an attempt to find the light. In the worst cases, this can cause serious issues or cause the seedling to die. This happens when the elongated stem simply is unable to support its own weight.
Light remains one of the most important environmental factors in growing a cannabis plant. Growing in a poorly illuminated environment with low light levels results in a stretched out plant with few leaves. What leaves there are tend to be very small in size. Because leaves are the “solar panels” that collect energy for the flowers, your yield will also be minimal in low light conditions.
How do I fix stretching cannabis seedlings?
It’s not necessarily the biggest problem if your seedlings have stretched, so long as you support the stems in time. This can be done with a small support, such as a small stick/cane. Some growers support a stretched seedling with a short length of drinking straw which has been slit down the side with scissors.
Most plants will recover and grow up to become healthy plants. Once the seedling has sufficient light it will stop stretching and instead use the energy to develop bigger/more leaves and a healthy plant/root structure. If you have stretched seedlings in their original pre-grow containers, you can also fix the issue by transplanting them into a new container and covering the elongated stem with soil.
The use of gradually increasing light is highly recommend for seedlings after a successful germination.
What is the best type of lights for cannabis seedlings?
The use of gradually increasing light is highly recommend for seedlings after a successful germination. Initially this can be done with relatively simple Fluorescent lights (e.g. T5/T8) or CFL’s (Compact Fluorescent lights). Both types are frequently used for the first couple of weeks after germination and provide the plants with ample blue dominant light for the first weeks of growth.
Other relatively inexpensive options are LED seedling light bars like the SanLight Flex series. These are long-lasting, high quality lights. Many modern growers have invested in specialist lighting for seedlings and get great results. But note that these seedling lights lack the power to grow mature cannabis plants. You will need a high powered light for bloom. HPS lights are a common choice and are cheap, though a high quality LED grow light will give a superior light spectrum, reduced heat stress, longer life and superior quality/results.
|How to grow weed easily indoors, expert tips and advice|
How do you know when it’s time to go from seedling to veg lighting?
Once cannabis seedlings are a couple of weeks old, many growers will move them from their ‘seedling light’ to a light which is a little more powerful. Allowing the seedlings a week or two to gain some strength before transferring them to a grow room containing the more powerful full spectrum lights is generally regarded as good practice.
Some lights that are perfect for seedlings are:
- Fluoresced lights T5/T8
- San light flex series
- Growspec Sunray Series
- California Lightworks Solar System Veg Light (Or SolarSystem + optional controller).
Since their introduction, LED lights have improved significantly. Affordability has also improved and LED is now the first choice for serious, professional cannabis growers.
Quality LED lights with full spectrum control can be used from the vegetive phase through to harvest. Light spectrum can be adjusted along the way ensuring that the plants always receive optimised light. The best spectrum for veg is blue dominant spectrum with perhaps some white. Blue spectrum light (400-500nm) will promotes healthy vegetative growth producing large, strong and healthy leaves and branches.
Examples of LED lights with a full cycle (veg to harvest) controllable spectrum are those from California Lightworks and GrowSpec. The California Lightworks Solar System series also includes purpose designed ‘veg’ lights with a fixed blue dominant spectrum.
Of course, cannabis seedlings can also be grown with excellent quality results under full spectrum (LED) lights as long as the correct light distance-to-canopy is maintained. Check with the manufacturers guidelines, which will vary according to the size and power of the LED light. Growers are often cautious to carefully acclimatise their seedlings when switching them from seedling lights to powerful ‘main grow room’ lights.
This can be done simply by ensuring that the main grow light is hoisted to a high position in the grow room, well above the seedlings. As the seedlings start to mature the light-to-plant distance can be gradually reduced. Once in full bloom, the plant is ready for maximum light levels.
When and how long to put seedlings under light?
It’s best to refer to the specific guidelines from the lights manufacturers. Grow lights come in a wide range of sizes and power outputs designed for different hanging heights and different sized grow rooms.
How long to light seedlings? Most people give the seedlings 18-24 hours of daily light. This allows them to grow leaves, roots and branches but not buds. Flowering only starts when light hours are reduced to around 12 hours per day, usually after around 4-6 weeks of vegetative growth.
8. Choosing the wrong type of soil to germinate seeds
Using some soil from their back garden to germinate cannabis seeds in is something the Dutch Passion customer service team see from time to time. This is usually a beginners mistake, or an attempt to cut a few corners and save cash. But it really isn’t recommended.
Sometimes the soil is healthy enough, and seeds will germinate without issues. But in many cases, the soil is too sandy (or too heavy with a high clay content). Garden soil may also contain unhelpful mold/fungi/pests or it may be too strongly fertilised. Often soil from the growers compost pile is used for seedlings.
The logic is that it is fresh, natural and perfect for growing. However, freshly composted soil can often be very nutrient rich. Perfect for mature plants, but toxic to seedlings, which are delicate and need only light nutrition (if any).
In other cases where garden soil has been used you may see mold developing over the soil surface, giving it a white discolouration. Seedlings affected by mold can have a high risk of damping off and dying.
What type of soil should I use for germinating cannabis seeds?
For the best result make sure you use clean, fresh soil. This can be found in a garden centre or grow shop. It may be described as a ‘light soil’ mix or a seedling soil. Don’t use strongly fertilised soil. Normal potting soil is often good to use. But for optimal results we advise a 50/50 mix of light-mix and coco substrate. This mixture is very easy for roots to grow in, and has just enough nutrients for the seedlings to get started.
When your seedling is 1-2 weeks old, the roots and plant can handle more nutrients and a very light feeding schedule can be used. When it comes to nutrients and young plants, err on the side of caution. It is better to feed plants with weak nutrients and slowly build up nutrient concentrations than to start with strong nutrients which can damage or kill young plants.
Also recommended are products like the Biotabs Starterkit. This allows you to prepare your soil in advance for the entire grow with slow-release organic nutrients. All you have to do then is water your plant, and leave nature to do the rest.
9. Not transplanting autoflower seedling to a larger size pot in time
Since the introduction of autoflowers years ago, this has been a common issue. While photoperiod plants can stay in a small container for a longer period of time during veg growth, autoflower plants may not always respond well to it. Autoflowers benefit greatly from a good start and a decent sized container. Therefore providing good care of them during the first weeks is important. Remember that autoflower seeds produce plants with a fixed life span and no time to recover if they have been root bound in a small container for too long.
A key role in this is the cannabis root system. Autoflowers have a main root stem that grows straight down. If this root is interrupted or damaged, it will result in a tiny plant. So it’s very important to transplant your autoflower to a large pot in time, also known as “potting up”.
Many growers will tell you that you have to germinate your autoflower in it’s final pot. However this can make the germination process a little more difficult. Instead, germination in a smaller sized container e.g. about 1 litre is a good alternative. You can keep your autoflower in this pot for about a week (maximum 2 – 2.5 weeks) and then transplant it to the final pot. In many tests over the years this has never caused a problem. When “potting up” do make sure the main root has enough room to point all the way down, by digging a deep enough hole.
When and how to transplant cannabis seedlings in a bigger pot?
How to transplant a seedling? One easy way is to fill the larger container with grow medium and then make a ‘hole’ in it with the small container currently containing your seedling. This will be the perfect size for the root ball of your seedling. But make sure that you don’t over-compact the new grow medium when you make the hole.
Many growers will water the new grow medium well before transplanting the seedling in it, this allows the roots to quickly expand into their new territory. Some growers sprinkle some beneficial Mycorrhizal bacteria into the hole to assist onward root development.
What pot size should I use to grow autoflowers?
When growing autoflower seeds most growers find that they perform well in any pot from 10 litres and above. However, because of the limited life cycle of about 11 weeks, there is no need to go much larger than 30 litres. And of course you can also plant your autoflower plants directly into the outdoor earth in your garden, without any pot restriction.
What pot size should I use to grow photoperiod cannabis plants?
When growing feminised photoperiod seeds, the plant can be maintained in veg growth until you are ready to reduce daily light hours to induce bloom. This means that you can keep a plant for several weeks in a smaller plant container, perhaps 10 litres or so, until bloom.
As you get ready to flip the plant into bloom, many growers will take the opportunity to first transplant it into a larger container. But much depends on the space constraints in your grow room, the number of plants you wish to grow, the period of veg growth and other factors. There will be a large difference, for example, in the container sizes used for Sea Of Green (SOG) growing vs Screen Of Green (SCROG cannabis cultivation method)
|How to grow cannabis with the Sea Of Green (SOG) method
How to grow cannabis with the Screen Of Green (SCROG) method
10. Sowing cannabis seeds too deep in the soil
Cannabis seeds don’t need to be buried deeply to germinate well. Placing your autoflower seeds or feminised seeds 3-5mm deep is sufficient for a fast and healthy germination. Your seed should not be deeper than 10mm. If you place the seed to deep, it will have trouble making it to the surface. While it’s trying to do so, the risks of rotting, overheating and getting damaged increase.
Sowing your autoflower or feminised seeds 3-5mm deep is sufficient for a fast and healthy germination.
In rare cases some growers have been known to simply scatter their seeds on top of the soil, like sowing a grain field. This method is definitely not recommended.
How deep do you sow cannabis seeds?
We advise a 3-5mm depth. But make sure not to go deeper than 1cm.
Bonus tip: How to get the seed shell off a weed seedling
many growers have been tempted to ‘help’ their plants germinate by trying to pull the seed shell off the weed seedling. This is simply never recommended. Pulling the seed shell off before it is ready can damage the seedling which derives some nutrition from the seed before it is discarded.
In the worst cases, the seed shell simply sticks to one of the cotyledon leaves (the first pair of baby leaves) where it will do no harm. Just leave the seed shell, it’s not worth risking the removal of it.
Hopefully this article has given you some useful advice and helpful information. Cannabis seed germination isn’t difficult if you follow a few proven rules and principles. Good luck, and enjoy growing!
11 Comments . Leave new
excellent article thank you very much Dutch passion,realy good one.
Had a seed shell stuck, so much that it ripped off the other cotaledan off at the base. It’s almost three weeks old now, still just a nice green 1 coteledan leaf, sure hope she pulls out of it and grows. As long as it stays sturdy and green I’ll let it be. Let ya know what happens. If and when that may be, I try to make a few leafs appear everyday when I scope it, but so far nothing yet. There’s still hope
if your talking about an auto my friend then that seedling is finished due to the life span they have once they sprout they have a life span of about 10 to 11 weeks and in that time they have to veg and flower if ur veg cycle is weak then ur flower cycle will be almost none existant
Can I start my seeds inside in my grow room, and then transfer them to my greenhouse with different lighting and different lighting time due to the early season?
As long as you are not too early in the growing season this should be fine.
Your plants can get a nice start if you start the growing process indoors
Thanks for the actual sound information, I wish I found this a few weeks ago. As a new grower I’m finding the hardest part of growing to be finding solid reliable information amongst the sea of first year masters.
This is my first year growing from seed and am 1/7 with my first batch and 1/14 (two days in) on my second run of seeds. I’m gearing I’ve over watered both times in my pods. Is it worth while trying to ring them out to try and dry them out a bit or just leave them be and pray?
We are very welcome!
When seeds are starting to germinate they are very delicate, so I do not advice you to try to take them out and let them dry. Best to hope these will survive and next time you should follow our guides
I have a small amount of seeds from a plant I grew last year. Second generation. Unknown origin. Extremely potent. The female plant sprouted a single male pollen sac stem, and produced the small amount of seeds on the plant. The seeds are like no other that I have ever seen in my over 50 years of using, and over 10 years growing cannabis. When put in a small container, they stick to each other, and glaze over with a resin-coated glaze. Have you ever seen or heard of seeds like these? Even when removed from container and separated, then put back in container, they reglaze over again. Excited to attempt to grow this year, outdoors. Any germination tips for such sticky seeds? Thank you!
Hello Bud Farmer,
That’s is a strange occurrence you have with your seeds, the thing we think of when you say a resin-coated glaze is THC. But this is not a normal thing for seeds to contain. Our advice is to stick to the regular germination advice we give here and wish you good luck with this years grow!
I have never grown a plant before. I hot some homegrown and it was littered with seeds, so I planted two, and now have two plants. The are doing well, I can see the little round leaves, then two little pot leaves, and today I noticed two more little pot leaves growing from the middle of that. They are loving the outdoors. I water in the AM and in the PM. I have been doing alot of reading, and now I am so confused. What stage am I in and what should I be looking for if they are doing good? Oh, and how do I know if it is a male or female?
Reasons Cannabis Seeds don’t Sprout
Top Reasons Your Seeds Aren’t Sprouting – And What You Can Do About It
Seeds are designed to sprout, but that doesn’t mean it’s easy. Some seeds sprout just about anywhere, whereas may need very specific conditions before they will crack. When it comes to marijuana seeds, sprouting should be easy, but there are times when the germination rate just isn’t what it should be. When this happens, it’s crucial to look at every part of the setup to determine what went wrong and what can be done to get the seeds to sprout.
Diseases or Mold Killing the Seeds Before They Get Started
Seeds can suffer from diseases and mold just like the plant can once it starts growing. Diseases can kill the seed before it gets the chance to start growing, and mold can cause the seed to die during the germination process. Fungi can also be an issue, as it can cover the seeds and prevent them from being able to sprout. Once diseases, mold, or fungi start to grow, there isn’t much that can be done to save the seeds.
What to Do About It:
Seeds can be soaked in diluted hydrogen peroxide for a few hours before planting. This kills any diseases that could be growing outside the seed so they have the best chance to grow. Watering should be done only as needed to prevent the growth of mold and fungi. The humidity in the room should also be carefully monitored to prevent the growth of mold and fungi and growers should ensure they have good ventilation if they are growing weed from seeds indoors.
Bugs or Other Pests Eating the Seeds or Seedlings
When growing outdoors, it’s easy for pests to devour the seeds. Bugs like to eat the seeds, and birds will often look through the garden and pick out any seeds they can find. Birds are often one of the biggest pests when planting seeds, even though they will be beneficial once the seeds have sprouted by eating caterpillars and bugs that might like to eat your sour deisel seeds or gelato seeds marijuana plant. Birds can destroy an entire crop of marijuana before it even gets started because they will search the area carefully and eat all of them once they know the seeds are there.
What to Do About It
The best option to protect seeds from pests is likely to germinate the seeds indoors. Once the seedlings are a couple of inches tall and they have their first set of true leaves, they can be transplanted in the garden and the birds will leave them alone other than to check and see if there are any bugs on the plants that they can eat. Another option is to use row covers. These can be inexpensively made and will cover the seeds completely until they start to grow. There are plenty of options for keeping birds away from the garden to protect the seeds, depending on what’s already on hand and what is more effective.
Seeds Aren’t High Quality
When seeds are low quality, they’re not going to have a high germination rate. Very few of the seeds are going to sprout and those that do may grow a plant that dies quickly or that suffers from issues while it’s growing, leading to a reduced crop. Buy cannabis seeds, purchased from a reputable seed bank, are designed to have higher germination rates and lead to much healthier plants. They have been tested for higher germination rates, so growers have one less thing to worry about when they’re starting the seeds.
What to Do About It
There likely isn’t much that can be done about low-quality seeds to get them to sprout. It may be possible to soak them in water to soften the shell so they will sprout, but the resulting plant might not be healthy either. Even with that trick, it can be difficult to get low-quality seeds to sprout at all. Instead, it’s best to always purchase high-quality
cbd seeds or thc seeds from a reliable seed bank to ensure the germination rate is as high as possible.
Seeds are Too Old
Seeds should be planted soon after they’re purchased, but many people will order seeds early and wait to plant them. Depending on how long they wait, the seeds will likely be fine. However, seeds will become less likely to grow if they are stored for years before being planted. If you find old feminized weed seeds or other random unlabelled pot seeds in an old cupboard that have been stored for a significant amount of time, the germination rate simply isn’t going to be what it would be if the seeds were planted earlier. High-quality seeds can be stored longer, but still may not sprout.
What to Do About It
Seeds should ideally be planted within a year or two of purchase to ensure the best germination rate. The length of time before a seed is no longer viable can vary, but most seeds will still have at least a decent germination rate if they are stored properly and used within two to three years. The germination rate will decrease further with time. Proper storage means the seeds are kept in a cool, dark place and away from moisture until they will be planted.
Too Much or Too Little Water During Germination
Water is necessary for seeds to sprout, but too little or too much can make a huge difference in the chances of success. Too little water means the shell will be too hard, so the seedlings won’t be able to push their way out. Too much water for seeds started in soil can lead to the growth of mold. Seeds can be started in water to help them sprout faster, but once they begin to sprout, they should be planted in soil to prevent issues.
What to Do About It
Water only when needed. If the soil starts to feel dry, go ahead and water it to ensure there is water for the seeds. Never let the soil dry out completely before watering it again. If the soil still feels moist, there is enough water for the seeds, so wait another day or two to water. Keep a close eye on this during the summer months especially to ensure the soil doesn’t completely dry out during the hottest days.
Seeds Are Getting Too Much Light
Marijuana Seeds should be not just be dropped in the soil and covered with just a light layer of soil on top of them. This not only welcomes seed-hungry pests like birds into yoru garden, but also doesn’t give you much control over the consistency of water and light that they are provided. You wan’t to mimic the conditions that nature provides for idea seed growth: moisture, warmth, and darkness.
What to Do About It
Follow our i49 germination guide and sprout yoru seeds in a damp paper tower. This setup should be kept in a awarm and dark place like a cupboard inside your laundry room or in a box on top of your fridge. If possible some ventilation is helpful rather than a tightly enclosed space, and it is also a good idea to rinse yoru seeds periodically to prevent the development of mold. As soon as you see a taproot emerg, you can remove from the paper towel and transplant to a small amount of growth medium.
The Weather Isn’t Right for the Seeds
When your autoflower weed seeds are planted directly in the soil outdoors, the weather can have a huge impact on reducing the germination rate. If the seeds are planted too early, it may be too cold for them to sprout. If the seeds are planted too late, it could be too hot. Marijuana seeds prefer a warm temperature to sprout and may not start growing if it’s below 60 degrees or above 80 degrees Fahrenheit. Some seeds may start to sprout despite the temperatures, but the germination rate will likely be far below what is expected if it is too hot or too cold for the seeds.
What to Do About It
Always germinate your i49 seeds using our recommended germination methood. This will help give the seeds the best chance to grow. Indoors, the temperature can be more carefully controlled and once the seedlings are large enough and the temperature outside is warm enough, the plants can be transplanted to the outdoor garden.
The Bottom Line
If you’re planning on growing marijuana in the USA, use the tips here to ensure your seeds are more likely to sprout and that you’ll have a higher germination rate. The proper preparation can make a huge difference in how successful you’ll be and can help you cut down on many of the potential problems and frustrations that could lead to seeds failing to sprout.