Posted on

male weed seed

If you’re looking for more precise, science-based methods to tell your plant’s gender, there are several labs that can sex your plant right after germination – eliminating the lengthy (usually around 6 weeks) wait to learn its gender. Portland, Oregon start-up Phylos Bioscience is in the business of studying cannabis genetics, and they sell a “plant sex kit” that’s pretty simple to do, even for the not scientifically-inclined. Simply press a cotyledon, or embryonic leaf, onto the kit’s filter paper and send it to their lab. They then test the leaf for the “Y” chromosome to determine its gender, just as would happen for a human male.

Can You Tell if a Cannabis Seed is Male or Female?

Friday August 17, 2018

W hen it comes to growing cannabis, sex is important. Not that kind of sex! We’re talking gender, as in being able to discern male from female. The reason for this is simple enough: only female seeds produce flower, also known as the buds you might have in your stash as we speak.

When it comes to growing cannabis, seeds can be male, female or hermaphrodites. Females produce the resin-secreting flower, and males make small sacs of pollen near the base of the leaves. Over the years, cultivators have learned that un-pollinated females (remember, males produce pollen) continue to make resin and flowers that have not been pollinated are much more likely to produce high-potency cannabis. But is there a way to know if a seed is female before growing?

Interested in growing? Click here to purchase your own seeds and start growing today!

Determining if a Seed is Male or Female

If what you’ve got is a handful of seeds, it’s pretty much impossible to tell which ones are male or female. The only way true way to tell the plant’s gender is to plant some seeds, then wait. After a period of several weeks, it will begin to pre-flower, or form a small bud in the crux of a branch. One of the first signs your cannabis plant is female is the appearance of pistillates that are wispy and generally white in color.

If you’re looking for more precise, science-based methods to tell your plant’s gender, there are several labs that can sex your plant right after germination – eliminating the lengthy (usually around 6 weeks) wait to learn its gender. Portland, Oregon start-up Phylos Bioscience is in the business of studying cannabis genetics, and they sell a “plant sex kit” that’s pretty simple to do, even for the not scientifically-inclined. Simply press a cotyledon, or embryonic leaf, onto the kit’s filter paper and send it to their lab. They then test the leaf for the “Y” chromosome to determine its gender, just as would happen for a human male.

What are Feminized Seeds?

While it’s basically not possible to determine the sex of a seed from a random bag of seeds, a practice known as feminizing is becoming quite popular. Feminized seeds are selectively bred to produce female plants, however, some growers do worry about some feminized seeds turning into hermaphrodites.

Despite the potential for hermies, if growing cannabis is more hobby than full-time endeavor, and you want to guarantee you’ll have some consumable product, knowing your seeds are female from the beginning is probably your best bet.

There are many companies that sell feminized seeds, but, buyer beware, do your research to make sure the seller is reputable, especially if purchasing online. Thanks to modern technology, most feminized seeds from reliable brands will be 100% female as advertised – but that doesn’t mean there aren’t people selling low-quality seeds out there.

Methods for Feminizing Cannabis Plants

If you have some experience growing cannabis and would like to bend a crop to your will to ensure that the seeds will be female, there are a few feminizing methods you might try. One such technique is to literally stress out a healthy female plant by interrupting the light cycle during flowering, called Rodelization Feminizing.

In the colloidal silver feminizing method, distilled water is mixed with pure silver and sprayed on female plants. This method works best when the plants are flowering. This results in pollen sacs being formed, which will allow the seeds to produce female plants.

Feminizing via the silver thiosulfate technique involves carefully selecting a nearly mature female plant, then spraying it with 50/50 mix of sodium thiosulfate and silver nitrate. This triggers a gender change, from female to male. Place this plant back with the others to pollinate other female plants, and female seeds are created.

How Important is Your Plant’s Sex?

How much time you want to spend figuring out the sex of your cannabis plants really depends on how much time and energy you’d like to devote to growing your own marijuana. If you are a medical cannabis patient or caregiver, for example, and need to know what kind of cannabis you are getting every time, buying feminized seeds from a trusted seller is the way to go. But, if you have some time, consider yourself a green thumb, and want to experiment with your grow, you could simply plant your seeds and see what comes up. Happy growing!

What are your thoughts on feminized seeds? If you’ve used them before, how did it go? Share your experiences in the comments below!

Erin Hiatt writes about cannabis, psychedelics, hemp, politics, and drug policy reform for THC Mag and Freedom Leaf. She has also written for AlterNet and Vice. Erin’s work and industry insights have been featured as the hemp and media specialist for the Cannabis and Hemp Association and as a guest on “In The Know 420,” speaking on federal and international drug policy. Erin’s background is in the entertainment industry, where she worked as a print model and actress on stage, film, television, and commercials. Erin is an avid hiker, trekking much of the southwest, and is a proud member of Actors Equity. You can follow her work on WordPress, @erinhiatt on Twitter, and @erinisred on Instagram.

Male weed seed
About the Author

How to Pick Male Plants and Make Cannabis Seeds

Why Every Home Grower Should Make Seeds (At Least Once)

I encourage every single grower to make seeds for themselves. A lot of people have been asking how, so I put together these basic tips. Hopefully, it helps a lot of people and is fairly straightforward. This isn’t meant to make you a breeder or share all my techniques or secrets, this is to familiarize you with the process of creating seeds.

It’s easy to make your own cannabis seeds at home!

It’s a shame that many grow books tell you only to throw away your males. New growers may not know, but anyone who’s grown for even just a few years gets to the point where they wish they still had something they grew in the past, which is no longer available in seed or clone for whatever reason. The older you get the more it happens. Seed lines disappear entirely once they run out, and due to people not making their own. It’s good to be self-sufficient.

While it’s always fun to check out the hard work of your favorite breeders and their strains, it’s equally as important to pollinate a branch or two for yourself here and there and see what magic you can create or preserve. Please share this article if it helps or inspires you. Big agriculture is coming to the cannabis growing world and has the ability to change the plant forever once contamination happens, just like in the veggie world. We are losing genetic diversity fast as thousands of unique strains are lost. Please do your part if you are passionate!

Make your own seeds to save special or unique genetics

How to Make Your Own Cannabis Seeds at Home

These are basic starting points for the home grower. I believe every person who grows cannabis needs to have this skill. Every strain goes away over time when people don’t make more seeds. Growers should know how to make their own seeds for preservation and sustainability. These skills can go a long way. The precursor to serious breeding is the basic technique of creating the seed.

1.) Grow Male Plants

Male plants can be grown in very basic conditions in an isolated space, then flowered for pollen. Males can be started flowering next to females with a close watch for the first week or two, but be careful and remove them before pollen sacks form, bursting open and pollinating everything.

Branches can be cut off and put into a cup of water on a windowsill or under a CFL bulb, even under veg light cycle once they are in bloom. Pollen can be collected within a week from these branches, saving lots of space. Males can also be cloned or flowered very small based on your needs.

Best, however, is flowering the males in their own tent or space. With a carbon filter and negative pressure, and careful practices, you can avo >(More on best male plant selection below)

A beautiful male cannabis plant

2.) Collect Pollen

Pollen can be collected by tapping a budding branch gently over a piece of paper. Pollen will spread easily in the air, so make sure to turn off all fans. Visit males only after tending to female plants so you don’t accidentally bring any stray pollen on your clothes or hair!

A male plant right as pollen sacs start opening

3.) Pollinate Buds

Take out your female to be pollinated or shut off all circulation fans. Gently apply pollen to a labeled branch. The pollen must meet the white flowering hairs to create seeds. Week 3-5 is best to pollinate, and you can do a single bud or branch per plant and keep the rest seedless.

Every pollinated branch should be labeled properly, your memory will not last as you think it will. A proper branch label includes dates, strain names, breeder/sources, and has the female listed first and male listed second. An example label looks like this: 4/20/2015 – Star Pupil (Mass Medical Strains) x Prayer Tower Sativa 9 (Bodhi Seeds) and the label should be kept with the seeds when they are finished. As years go by, you will be thankful for the dates and breeder information, which can escape our memory on occasion.

Overhead shot of a seeded cannabis plant. Strain is “Star Pupil”

4.) Deactivate Stray Pollen

Water generally deactivates pollen, wash clothes and shower if needed after handling. 3+ hours after pollination, the plant can be sprayed down with water to deactivate stray pollen and can be brought back into grow room and fans turned back on.

Avoid spreading pollen unintentionally. It can get everywhere!

A male cannabis plant exploding with pollen. Strain: Prayer Tower Sativa (below)

5.) Collect Seeds

Seeds are done in 2-6 weeks and should be dried in the bud when the plant is harvested. Seeds should be sproutable within one month of drying.

Female buds become swollen with seeds

A cannabis seed peaking out

What strains should I use?

Any strain with traits that you like, which speaks to you, or seems like a good cross, means your intuition is telling you something. Starting with stabilized or homogeneous lines is always a benefit. Certain genes such as Cookies, OG, and Diesels, are full of hermaphrodites and should be used with caution, only to be bred with if they are really your #1 passion. Follow your heart.

Crossing two unrelated strains for the first time is called an F1. Crossing a brother and sister F1 of the same strain creates an F2, and so on. Selections play a huge role in what the outcome will be. Making F2 seeds of an F1 you purchased, will not give you the same seeds. Rather, you will see new phenotypes resembling some of the parents and their parents, etc. With huge potential to find new special plants within.

Many combinations will work great, and some will not. If you fail, try again, selecting new parents. Each combination is unique. A and B might work great together, and C and D might work well together, there’s still a possibility that A and C combine to create junk. Every parental combo is unique!

If you see a unique trait that you like, make seeds!

Selection Techniques

Female Plants

Selecting a good female is easy, flower female plants from seed and again from clone to test stability. Smoke test is important. A potential mother plant should have all the high-quality traits that matter to you. Hermaphroditic plants are to be avoided.

Female plants to be pollinated should have all your ideal traits. Use only your best females.

Male Plants

Selecting a male, you have to use your senses a lot. The ones who grow best and smell best are a good starting point. Structure and root growth are important. Hollow stems may indicate high THC potential. Cut the top off a couple nodes down and find out. First showing or fastest flowering males are generally discarded. Very slow blooming late males are often times more recessive although not always. I like them. Males will start to drop pollen before they are “done” flowering enough to see their true traits. As a beginner, you can use the pollen at any stage, but those doing real selections are advised to always flower your males for weeks after the pollen starts.

For male selections, a strain you’ve grown before and enjoyed the females is a safe starting point.

Watch for resin production, look at how the flower clusters stack and produce. The male flowers form similarly to female flowers, large yield potential is often apparent in largely formed male clusters that can look almost like female buds from a distance. The more males you have to choose from, the more fun you will have!

Male plants can be a lot of fun to grow, too. Just like the females of the genetics they come from, they all have their own characteristics and unique traits. Once you get into “hunting males” you could get hooked! Some of my prized male selections from over the years are shown here. You’ll see resin production and traits of large floral clusters, as well as unique coloration!

This male Weapon X cannabis plant is about to pop!

Male Blue Magoo BX looking trippy under LEDs

Strain: Mr. E Reversed

For more advanced breeding selections, I recommend starting ideally a few hundred seeds. (For beginners, as many as you can is great, will help you find the best ones you can. Use your intuition!) Plants can be weeded out every few weeks selecting only the best contenders to flower out, and a lot can be achieved in a spare tent or closet this way, while still selecting through large populations! Clones of a prized breeding male may be kept in veg the same way females are, to be used again and again once their offspring are proven good! This is how a breeder can create the same batch of seeds for years and years, by using the exact same parents held in clone form.

Conclusion

These tips are just the beginning, and the purpose isn’t to teach you how to breed, but to teach you how to learn your own path and style of creating seeds and preserving our very special plant. The seeds you create will always be a very special grow for YOU.

Making your own seeds is more important than ever. We must do our part to preserve the natural genetic diversity of this healing plant as it has evolved for millions of years. Home growing is an important skill as commercial and medical cannabis is increasingly full of toxins and scary new technology. Please grow responsibly with love.

About the Author

Star Pupil strives to copy nature while incorporating breeding techniques and plant knowledge passed down from generations of experienced growers. Mass Medical Strains is located in western Massachusetts and all breeding and growing methods are 100% organic. Each and every plant is grown and harvested with wholesome intentions and positive vibes.

  • Mass Medical Strains Website
  • Instagram account (Note from Nebula Haze: Check out their Instagram to see new pictures of all their strains!)