Posted on

germinated weed seed

Germinated weed seed
Rockwool cubes, composed of fibrous wool-like material provide great water and air exchange, which is ideal in hydroponics.

Best Way To Germinate Weed Seeds

You’ve probably noticed by now that there are a few different methods you can choose to germinate your cannabis seeds.

Not all of these methods have the same success rate, and your precious cannabis seeds are expensive to buy.

Therefore, you really want to choose the germination method that’s going to give your seeds the best chance to become beautiful, bud producing plants.

So what is the best way to germinate weed seeds? Read on to find out…

Related posts from GreenBudGuru

Best Way To Germinate Weed Seeds

First, take a look at the comparison table below to get an idea of some general success rates for each germination method.

We’ll explore each method in more detail below.

Germination Method Success Rating
1. Starter plugs & Seedling Cubes 5/5
2. Planting directly into soil 3/5
3. Soaking seeds in water 4/5
4. Paper towel method 3/5

1. Starter Cubes & Seedling Plugs

This is by far the best method to germinate weed seeds.

Germinating with starter plugs or cubes is easy and the most reliable method on this list.

What Plugs Should You Use?

Options for starter cubes are seemingly endless, but the majority are made of either rockwool or peat.

The differences are subtle, but very important depending on how you plan to grow your plants after germination.

Peat plugs are an organic option, and sometimes contain a small starter nutrient charge which helps young seedlings after germination.

Rockwool cubes, composed of fibrous wool-like material provide great water and air exchange, which is ideal in hydroponics.

Peat plugs hold more water than air compared to rockwool cubes, so they aren’t ideal for hydroponic grows.

So, rockwool or peat? The primary difference comes down to how you will grow the plant after germination.

For hydroponics, rockwool is the better choice.

For soil/coco/etc., peat plugs generally fare better, but ultimately germination will be nearly identical for these two germination mediums.

How To Germinate With Plugs:

Step 1: After buying your plugs or cubes, soak them in water until they are fully saturated.

Step 2: Place your seed(s) into the pre-cut holes in the plugs. Use some of the plug material to gently cover the opening.

Step 3: Put the plugs into a square box or tray and cover with a plastic dome. This ensures a high humidity environment, which increases germination success, and helps seedlings along after germination.

2. Planting Directly Into Soil

This method is as old-school as it gets, drop your seeds in some dirt, add water, and you’re done.

If only it were that easy!

Unfortunately, it’s not quite so simple.

There are lots of factors that go into this method, and each must be nearly perfect for germination to occur.

How to germinate seeds directly in soil:

Step 1: Purchase quality soil from a reputable source. You want soil with good drainage, this allows for air exchange; seeds need moisture but you don’t want to drown them.

Step 2: Now, you need to plant your seeds at the right depth. A good rule of thumb is to plant seeds 2 times deeper than the width of the seed.

Step 3: Provide water for your seeds by soaking your container in a tray containing about an inch of water. This allows the soil to be moistened uniformly, preventing over-watering. This also keeps the seed in the perfect place for germination to occur.

Check out this method in action:

This method allows you to start your seed directly in your planting medium, but if you aren’t careful with this technique, you can run into trouble.

Seeds need air and water to germinate, if there’s too much of one, the other falls short, preventing germination.

If planted too deep, the energy available to the seedling won’t be enough for it to break the surface.

This will essentially starve and kill your seedling.

If you don’t plant deep enough, the seedling may dry out, or never become moist enough to germinate.

3. Soaking Seeds in Water

This method is not so much a way to fully germinate your seeds, but rather ensures rapid and reliable germination.

As mentioned in the previous methods, seeds need water to germinate.

This method involves placing seeds in a container filled with water rather than into a plug or the soil.

How to start germination with water:

Step 1: Place your seeds in a container of clean water and allow to soak overnight, or for at least 12 hours.

Step 2: After soaking at least 12 hours, use sterilized tweezers or clean hands to remove the seeds. Immediately place the seeds into your medium, such as a plug or soil.

Check out this method in action:

Why does this work?

This method increases germination rates because the seed is primed, it’s already absorbed water and broken dormancy, so is ready to push out it’s first roots.

4. Paper Towel Method

The paper towel method is similar to soaking seeds in water, but this method will germinate your seeds to the point where the taproot has emerged.

How to germinate seeds with paper towels:

Step 1: Place a folded wet paper towel into a plastic container, or on a plate.

Step 2: Place your seeds on the paper towel with adequate space between them. Cover the seeds with another folded wet paper towel.

Step 3: Put a lid or plastic wrap on the container, or another plate on the plate. Seal the container but leave a small hole for air exchange.

Step 4: Place your plates or container in a warm (70-80F / 21-26C) and dark environment

Like soaking the seeds in water, this method provides lots of water to the seeds to start germination.

But it also allows enough air exchange for the seed to produce a taproot and begin growing into a seedling.

Check out this method in action:

This method helps to increase the chances of germination and seedling success, but can introduce some extra issues.

  • Once seeds have germinated, they may grow into the paper towel, making removal difficult and potentially damaging the fragile seedlings.
  • The paper towels and the container you use for germination must be sterile. This is nearly impossible, so you are likely to grow more than seedlings (i.e. fungus) with this method.
  • The extra handling of sprouted seedlings is the biggest issue with this method. Even if you’re very clean and careful with your seedlings, it is extremely easy to damage or contaminate them. Contamination and early damage can ultimately stunt or kill your baby plants.

Verdict

So what is the best way to germinate weed seeds?

After examining each method, if you absolutely had to pick one, it would be starter cubes and seedling plugs.

If you consider everything that can go wrong when germinating seeds, this method does the most to remove potential pitfalls.

Why Plugs?

  • It’s relatively fool-proof because the cubes can only hold so much water, so no overwatering.
  • The pre-drilled holes are not too deep or too shallow for cannabis seeds.
  • The cubes/plugs hold moisture for long enough time to allow for the seeds to take up water. They also won’t dry out too quickly.
  • They provide a soft medium for young roots to push through.

But the best way to germinate weed seeds would really be a combination of these methods.

Use either the paper towel or water soaking method to get your seeds to uptake water.

Next, transition them to either soil or plugs.

This gives you the advantages of each method, with the least downside of each.

Germination Tips

Here are a few extra tips to follow when trying to germinate your cannabis seeds:

  • Keep temperatures in the area you are germinating seeds between 70-80F (21-26C)
  • Germinate seeds in total darkness
  • Don’t use hard tap water (ppm above 120), it can damage the seed
  • Avoid using chlorinated tap water, it can damage or kill microbes that help young seedlings develop
  • Don’t add nutrients to the water when germinating seeds, the seeds already contain all the nutrients they need
  • When seeds germinate, don’t put them under intense light (HID or sunlight), the seedlings will burn and/or dry out
  • Provide non-intense light (i.e. T-5 fluorescent light) for seedlings as soon as they emerge, this will prevent stretching

Related posts from GreenBudGuru

Use a tweezers to put the pot seed in the dimple. The root sting (germinated root from the seed) should point downwards. Is the weed seed stuck to the moist paper towel? Don’t pull the seed but spray the seed with water again. You will see that the marijuana seed is now easily released.

How to properly plant weed seeds after germination?

Whether you have chosen autoflowering weed seeds, female or regular seeds, after germination you should plant the weed seeds immediately with which you start the growth process. For this the root from the seed must be at least 0.5 to 1.5 cm long. If you do not plant the seed immediately after germination, the cannabis seed will probably die. It is therefore important to take immediate action.
Are you a beginner and you wonder how to properly plant weed seeds after germination (indoors or outdoors) and what you should take into account? Read the four steps below and grow your own beautiful cannabis plant at home:

What do you need to plant germinated weed seeds in soil?

To plant the germinated weed seeds in soil you need the following attributes:

  • Lightproof pots with drainage
  • Moist airy potting soil
  • Pen
  • Tweezers
  • Germinated weed seeds

Step 1 – choose the right pot and fill it with potting soil

To choose the most suitable pot you have to ask yourself how big you want the plant to grow. A large plant will not grow optimal in a small pot. As a rule of thumb, every 5 liters is about 20 cm of plant. Although this rule doesn’t apply to all species, it’s a very useful indication for the average height. Are you in doubt? Then choose a larger pot size. Use the table below to choose your pot size.

What size pot for my weed plant?

Pot in liters Plant height
5 10 – 20
10 20 – 40
15 40 – 60
20 60 – 80
25 80 – 100
40 100 – 120
Choose a light-proof pot with drainage

Roots should not be too wet. It’s therefore important to choose a pot with drainage. With drainage the excess water can easily drain through the drainage holes on the underside of the pot. In addition, the pot must be light-proof so the roots do not come into contact with light.

Tip: choose air pots or smart pots. These pots provide roots with extra oxygen with which faster growth is stimulated.

Fill the pots with moist potting soil

Have you chosen the desired pot? Then fill the pot ¾ with moist, loose and airy potting soil.

Step 2 – make a small dimple

Make a dimple in the potting soil. You do this simply by putting a pencil in the ground.

Step 3 – place the cannabis seed in the dimple

Use a tweezers to put the pot seed in the dimple. The root sting (germinated root from the seed) should point downwards. Is the weed seed stuck to the moist paper towel? Don’t pull the seed but spray the seed with water again. You will see that the marijuana seed is now easily released.

How deep to plant germinated cannabis seeds in soil?

The dimple most be 0.5 to 0.6 cm deep. Make sure the dimple does not get deeper than 0.6 cm and not shallower than 0.5 cm.

Step 4 – cover the ground

Once the weed seed is in place, gently cover it with soil. Enough to block the light, but not too much. Do not press the ground but cover the seed gently. The seedlings are ready to grow.

How long doe weed seeds take to grow?

Seedlings normally emerge 24 to 72 hours after the germinated seeds where planted.