Posted on

fastest way to germinate weed seeds

You take the second plate and place it upside down on the plate with the seeds.

How to germinate weed seeds properly

Maybe you have some old weed seeds in your possession or you bought some fresh ones via Weedseedsexpress. Either way, when you have weed seeds and you want to start of you probably want to know how to germinate weed seeds properly.

Weedseedsexpress supplies cannabis seeds for indoor and outdoor growing that are easy to germinate, but because you are dealing with a product from nature, you need to skillfully address the germination process. Moreover, a successful germination requires patience.

Do you want to know what’s the best, quickest and easiest way to successfully germinate your weed seeds at home and what you need? Please take your time to read all the information on this page carefully. In this way you ensure yourself of a successful germination process.

Best way to germinate weed seeds

Although there are several germination methods, not all methods are equally efficient. An example of a less efficient method is for example by planting the seed directly in the soil. Especially since you cannot determine the direction of root with this method and the change of rot. Fortunately, there are different ways that have proven to be efficient like the germination in rockwool. So what is the best way to germinate weed seeds?

The best and most safest way to germinate weed seeds is by applying two different methods one after the other. First the water cup method and then the paper towel method. Both really easy methods which you can do at home. Let us guide you through.

How to germinate weed seeds in a paper towel?

The germination process of cannabis seeds with the paper towel method consists 5 simple steps. Here’s a short summary:

  1. Place the cannabis seeds in a cup of lukewarm water and put them in a dark room for 18 to 36 hours. Wait until the seeds start to crack a bit before you apply the paper towel method.
  2. Put two layers of paper towel on a plate and spray the paper wet with a plant spray.
  3. Pour your seeds carefully on the wet paper towel, place a new paper towel over it and spray the paper wet. Make sure that the seeds are in contact with the wet paper towels.
  4. Take another plate and place it upside down on the plate with the seeds so that you create a dark space. However, do not exactly align the edges of the plates. The seeds need oxygen to germinate. Check every 5 to 8 hours if the paper towel has not dried out and spray water again if necessary.
  5. Check after 24 hours if the seeds have germinated. If not just let them germinate for another 24 hours. Note: some seeds need 48 to 72 hours to germinate but it can even take 168 hours (7 days). Patience is therefore required.

How to germinate weed seeds – step by step

Below you find a complete explanation of the steps above. If you stick to our step by step guide you ensure yourself of germinating cannabis seeds in the right way.

What do I need to germinate weed seeds?

For a successful germination you need:

  • Cannabis seeds
  • Paper towel
  • Two ceramic plates with the same size
  • Plant spray
  • Water
  • Drinking cup (glass)
  • Tweezers

Step 1: Soaking weed seeds in water

For an successful germination, it is important to soak your weed seeds before applying the paper towel method. By pre-soaking the cannabis seeds, the husk of the seed softens and the seed will germinate more easily.

How to do this?

Grab a glass drinking cup and fill it for three quarters with lukewarm water. Then place the cannabis seeds into the cup of water. You will see that the cannabis seeds will float first. Try to push the seeds down gently with the tip of your finger without touching the bottom of the glass. Will the cannabis seeds rise again? Then wait 1 – 2 hours and try again.

Put the glass with the seeds for a maximum of 18 to 36 hours in a dark room with a temperature of 21° to 25°. In the meantime, check if the cannabis seeds are all sunk. Are some seeds still floating? Try pushing the cannabis seeds down again carefully.

What will happen?

Your seeds will eventually sink to the bottom. This happens normally after a few hours. In most cases the seeds have sunk to the bottom of the glass after 14 to a maximum of 24 hours and some are cracked open. Sometimes not all seeds are cracked open yet, but you won’t have to panic. In step 2 these cannabis seeds are further stimulated to germinate.

Note: be careful with leaving the seeds in the water for more than 36 hours. If you do that, seeds can get a lack of oxygen, drown and rot.

Step 2: Prepare the plate and kitchen paper

In step 1, some seeds probably germinated a bit. Others possibly not yet. Whatever the situation is, after a maximum of 34 hours you go to step 2 of the germination process.

What to do in step 2?

In this step you need a ceramic plate and two sheets of kitchen paper (paper towel). Kitchen paper is thick enough to retain the moisture, which is very important for the germination of your cannabis seeds.
Take the plate and put two sheets of kitchen paper on it. The kitchen paper must cover the dish or plate entirety. Spray the paper towel completely wet with a plant spray. The paper must be wet, but not dripping wet.

Step 3: Place the cannabis seeds on the wet kitchen paper

Before placing your seeds on the wet kitchen paper, the cannabis seeds are still in the glass with water. Depending on the glass, you may have a lot of water in it. Therefore, carefully pour ⅔ of the water out of the glass. Be careful not to wash the seeds down the drain.

What to do in step 3?

Leave your seeds in the glass with about 1 cm of water and carefully pour them out onto the center of the kitchen paper. Carefully pick the seeds up with a tweezers and place them on the center of the edge slope. Place the blunt end of the seeds, the tip without point, on the paper towel and make sure there is a space of 1.5 cm to 2.5 cm between the seeds. In this way you prevent their roots from becoming entangled. Do you have insufficient space on one plate? Then use two plates.

Note: try to place the seeds in place with as little contact as possible. The less you touch the seeds, the smaller the chance of damage. Besides, never touch the roots.

Are all the seeds neatly in place? Then grab another double paper towel. Spray the kitchen paper a little damp and place the paper over the first sheet of kitchen paper where the seeds are on. Once the paper is in place, spray the paper again so that the wet paper towel makes good contact with the seeds. This is very important to let the seeds germinate well.

Step 4: Covering

To germinate your pots seeds, the seeds must be in a dark environment.

What to do?

You take the second plate and place it upside down on the plate with the seeds.

Note: because the seeds need oxygen to germinate, the edges of the plates may not lie exactly on top of each other. Then place the double plate with seeds for 24 hours in a dark room with a constant temperature of 21° to 25°. Check every 5 to 8 hours if the paper is not dehydrated, without removing the top layer. Spray the paper again if necessary. This is very important. When the seeds become too dry, they can die and never germinate.

Step 5: How long does it take for weed seeds to grow roots: Check after 24 hours

A germination process lasts on average between 24 – 48 hours. After 24 hours you can do your first check by carefully removing the top layer of kitchen paper. The germinated seeds with a root of 1 to 1.5 cm have to be planted directly.

Seeds that haven’t germinated after 24 hours will need extra time. Provide these seeds with another additional 24 hours and repeat step 5 by keeping the paper towel wet. Check again after 24 hours whether these seeds have germinated. In rare case, germination can take up to 168 hours.

Note: Be very careful when the seeds germinate. Avoid poking, pulling or touching the seeds with bare hands. You don’t want to damage the roots.

NOTE: Regardless of which method you employ, seeds should be soaked in a dark, warm environment for the best results. Once the taproot (tiny, white root-tip) emerges from the seeds, they are ready to be planted into the growing-medium.

How do I germinate seeds?

  • Thread starter
  • #1

SmokeyMacPot

New Member

There are different methods that prove successful:

Seeds can be placed between folded, wet paper towels that are kept moist and warm in an area between 70-85 degrees, such as on the top of the refrigerator. After a period of 48 hours to 2 weeks, the vast majority of viable seeds will crack open with a white root tip emerging. At this point, the seed is gently placed in the growing medium approximately 1/2 inch deep with the root tip pointed downward.

Seeds can also be placed directly into the grow medium with the pointed end facing downwards to germinate without the transplanting step. The medium is kept uniformly moist until the young seedling emerges on the surface.

It is not necessary to provide light before the seedlings break the surface, but it is beneficial to have strong light present from that moment forward to prevent excessive stem elongation.

Fluorescent lighting is satisfactory with cool white or higher color temperature tubes being preferable. Metal halide lighting is beneficial, if heat and moisture are monitored.

*Seeds prefer high light conditions once they have become rooted. They will stretch under most floroescents.

How can I increase the germination rates of my seeds?
Contributed by: Lord Of The Strains
Submitted: March 30, 2004

Pre-soaking your seeds before planting them is a terrific way to ensure a greater germination percentage and faster germination rates. There are a few different methods of soaking seeds; the two most popular being the “Paper-Towel Method” and “Standard” (soaking in a cup or similar object), both of which yield similar results if done correctly (taproot emerges in approx. 24 hrs.)

NOTE: Regardless of which method you employ, seeds should be soaked in a dark, warm environment for the best results. Once the taproot (tiny, white root-tip) emerges from the seeds, they are ready to be planted into the growing-medium.

1. Paper-Towel Method:

MATERIALS: Paper-towels (at least 2 sheets), 2 plates/dishes (or similar object), warm water.

It involves placing the seed(s) onto a damp paper-towel (which is placed on a plate/dish, or similar object), and covering them with another damp paper-towel.
For best results, use water that is a bit warmer than room-temperature (to compensate for any drop in temperature), and cover the plate/dish with another plate/dish (to prevent heat from escaping, as well as protect the seeds from light).

Also, using more than one sheet of paper-towel above and below the seed(s) will yield better results, as well as adding more warm water to the paper-toweling/bottom dish before covering the whole arrangement with the optional second plate/dish.

WARNING: It is imperative that the seed(s) are removed from the paper-toweling as soon as the taproot(s) has/have emerged; If the seed(s) is/are left to soak for too long, delicate micro-roots can be torn when the seed(s) is/are removed from the paper-toweling, which will temporarily retard germination/growth as well as stress the plant (which could possibly result in an unfavorable male/hermaphrodite).

2. Standard Soaking

MATERIALS: Cup/mug (one that retains heat well; i.e. ceramic coffee cup), plate/dish/lid (big enough to cover cup/mug/etc.), warm water.

PROCEDURE:
In this method, the grower places his/her seed(s) in a cup/mug of some sort, which is filled with warm water. I use a ceramic coffee cup – as it is a good conductor of heat – and I cover it with a ceramic plate (again, to prevent heat from escaping, as well as shield seeds from light).

For best results, use water that is a bit warmer than room temperature (again, to compensate for any drop in temperature). It is normal for the seed(s) to float on the surface; just let it/them soak for a while then give it/them a little tap to make it/they sink (the best, most viable seeds will sink to the bottom). Although it is virtually impossible to over-soak seeds using this method, seeds should only be soaked until the taproot has emerged.

CONCLUSION:
Both of these methods are equally effective if executed correctly. Most seeds should show their taproots within 24 hrs., and all seeds should show taproots within 48 hrs. (assuming you are using good, viable seeds).

TIP: (for soil-growers)
If you want to further increase your germination rates, simply plant your seed(s) shallow; approx. 1-2 cm. deep. The seedling(s) should break the soil-surface within 24 hrs., or 48 hrs. for the most (again, assuming you are using good viable seeds — otherwise, it may take another day or two). Once the seedling(s) has/have sprouted, add a little extra soil at the base of the stem(s) for additional support and root-protection.