Cannabis Seed Germination Cup Of Water

1. Germinate hemp seeds directly into soil 2. Activate cannabis seeds with water 3. Germinate cannabis seeds with paper towels – GIF How to germinate cannabis seeds? In a cup of water, On a damp surface or In soil. My favorite way of germinating weed seeds is to put them in a cup of water. Germinating pot seeds in water is very simple and effective method especially for seeds with a harder shell or older seeds. Here are all the steps for germinating weed seeds in water

The best way to germinate cannabis seeds!

With this guide, we would like to explain to you, how to germinate a cannabis seed most successfully. There are three common methods of cannabis seeds to germinate. Properly executed, they will be successful in almost every case.

  1. Germinate hemp seeds directly in soil
  2. Activate cannabis seeds with water
  3. Germinate cannabis seeds in damp cloths

So that cannabis seeds can be germinated under optimal conditions, in all three breeding types, some basic rules have to be considered. Before we describe the methods exactly, we first want to talk about these basics; The first golden rule is for example, not to treat cannabis seeds with bare hands to avoid the chance of contamination with bacteria or fungus. We strongly recommend the use of clean gloves and some disinfected tweezers!

Germinate weed seeds – The quality of the water:

The water temperature should be around 20 degrees and have good quality. The quality of the water can be tested with a PH meter and an EC meter. Recommendation: Osmosis water or drinking water very debil (with little salts and mineral arm).

The ideal substrate to germinate weed seeds:

You can work with different substrates. The most common are earth (light mix), coco and rock wool. Even with the substrates, the soil and ambient temperature should be right. A light mix is specially adapted to sensitive plants such as hemp. Most mixtures contain nutrients and minerals for a few weeks, which the young plant absorbs when it needs them.

For Coco substrate, before working with it, you should test the EC content, as most Coco substrates have a very high value. To lower the value, wash the Coco once with mineral water (osmosis water).

Breeding for coco and rock wool is also referred to as hydroponic cultivation, which means that significantly more air circulation at the roots is created. But the nutrients that are then fed to his plants are more directly absorbed by them. The risk of over or under-fertilization is greater but also the expected yield. Breeding on hydroponics is what gardeners with more experience.

Required air, light, and temperature for germination:

In order not to endanger the germination capacity of the seed, it should be stored in a dark and cool place (6 ° – 10°).

Before the seed is germinated, it must not be exposed to light and the air temperature should not be below 20° C (68° F) nor exceed 30° C (86° F). Maintaining a temperature around 25°C (77° F) is ideal. For outdoor cultivation, it’s recommended to germinate indoors, letting the seedlings grow for a few weeks, and don’t set plants outside too early.

Method 1. – Germinate hemp seeds in soil

  1. Prepare material (fill small flowerpots with soil).
  2. Lightly moisten the potting soil with good water. (Too much moisture = mold and fungal danger).
  3. Place the seeds in a 0.5cm recess in the center of the pot. Make sure that the seed is transverse and not upright, this can affect the germination rate. Nature has not shaped the seed without reason oval. If you set the seed transverse, it will easily position itself properly in the soil after germination! When you work with jiffies it works something similar. The jiffy is only soaked in water until it swells apart, then the water is expressed again without crushing it until residual moisture is over. At Jiffy, the factory usually prepares a slight depression for the seed.
  4. Lightly cover the seed with soil so that no light can shine directly on the seed. Also with the jiffi one covers the seeds with a little material. Wet but not wet! Now pour no more that could flush the seed back up and the amount of water is also difficult to control.
  5. In case of too little moisture, we recommend wetting the plant with a spray bottle.
  6. Now put the plant in a safe place and depending on the variety and genetics can be expected in the next 36 to 72 hours with a first result. In some cases, it can take up to 6 days.
See also  Cannabis Seed Breeders

Method 2. Germinate cannabis seeds in a paper towel.

  1. For preparation, we gonna need two plates, some sheets of kitchen roll, good quality water as described above, and our seeds.
  2. Put two sheets of kitchen paper on one of the plates and moisten them with water.
  3. Put your seeds on the damp cloth and put two more kitchen towels over it.
  4. Moisten also the upper cloths. Runoff excess water that the wipes are only slightly saturated.
  5. Put the second plate on the other plate like a shell.
  6. Store in a dark place and check daily that do not dry out the kitchen towels and of course to see if the seedlings are already broken. Once it is germinated, a small white shoot comes from one side. Now the time has come, the seed can be placed in the substrate of your choice. Carefully remove the seeds with tweezers from the cloths and carefully place them diagonally with the small germ downwards into a prepared hole. Only so deep that the seed is slightly covered with soil (max 5mm).

7. Wait, wait, wait and then be happy.

Method 3. Germinate cannabis seeds in a cup of water

This method is particularly suitable for activating seeds that have been stored for a long time

The addition of hydrogen peroxide is suitable for softening the husk of the hemp seed. About 3 – 5 drops per 100 ml of water are sufficient.

  • Prepare a cup of water at a temperature of about 12 degrees Celsius (54 degrees Fahrenheit).
  • Put the seeds into the water for 12 hours.
  • Prepare to plant the seed in a small flower pot. Exactly as we described in method 1, under point 3.
  • After planting, cover the seed with the substrate and moisten again with water.
  • After about 2 – 3 days, the germ should gradually see daylight.

Cannabis seeds do not germinate? These are the most common mistakes:

  1. The pH of the water is too high or too low. Regardless of the method used to germinate the cannabis seeds, the pH should always be between 5.5 and 6.5.
  2. The EC value of the water is too high, it should be below 0.8.
  3. The water temperature was ignored, it should be between 20 ° and 22 ° celsius.
  4. If you let the hemp seeds germinate into soil, it may be that too much water was used, the soil was fertilized too much, or that the seed was pushed too deep into the soil, or was placed upside down.
  5. The seeds were exposed to strong temperature differences during transport.

This information is only of interest to customers who live in a country where cultivating and cultivating cannabis seeds is not a violation of the law.

Germination of Cannabis Seeds

You bought beautiful Premium Pro Seeds from Suzy Seeds and of course, you want to get started. First, you have to germinate the seeds. Below, I will discuss my favorite way how to germinate cannabis seeds extensively, but also suggest other good methods. Suzy Seeds exclusively sells feminized cannabis seeds, so you don’t need to remove male plants, which applies also to autoflower cannabis seeds. It’s good to know that a cannabis seed does not need light to germinate. What is important, though, is a humid environment and an ambient temperature of around 20 °C. In general, there are three ways to germinate cannabis or marijuana seeds:

– In a cup of water

– On a damp surface

– In soil

How long does it take cannabis seeds to germinate in general? Or how do we germinate autoflowering seeds? The time of germination of marijuana seeds depends on the method of germination we apply, but autoflowering seeds germinate in the same way and time as feminized or regular cannabis seeds.

See also  How Long Do Cannabis Seeds Last

My favorite way to germinate the seeds is to put them in a cup of water and then between a damp paper towel or tissue. This goes well in 99% of the cases. That is why I will more extensively describe this first way.

We recommend not to touch the seeds or the seedlings with your hands. If you do anyways, make sure your hands are clean and if possible use plastic gloves.

Suzy’s Tip: Try your germintion method on a couple of seeds (maximum 3). This way, you can test if your method works well. Often a wrong germinating method is used and the seeds don’t germinate. Do you want to germinate your seeds in a different way? Continue reading.

Germinating cannabis seeds in a cup of water

Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or at least not optimally germinate. Use a clean room and area for the germination process. Fill a cup with water and put the cannabis seeds in it. After 3 to 5 days, the seeds should pop open and a tiny root should come out.

As soon as the sprout is 2 to 3 mm, you can carefully get the seeds out of the water and plant them in the soil. Planting the germinated seed has to be done with lots of care and attention. Put them 0.5 to 1 cm in the soil with the root down. This way, the root (the white sprout) will more easily grow downwards.

Germinating cannabis seeds on a damp surface

Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or at least not optimally germinate. Put the cannabis seeds on a surface that holds moisture, like wadding, paper towel or tissues on a saucer. Moisten the surface well, but avoid making it too wet. The moisture evaporates quickly at room temperature, so check during the period that the seeds will germinate if the surface is still damp enough.

You can also cover the seeds with damp wadding or tissues and another saucer on top. Because of the moisture that gets into the seeds, they are activated and start to germinate. As soon as the germ is 2 to 3 mm, you can carefully get the seeds out of the water and plant them in the soil. Put them 0.5 to 1 cm in the soil with the root down. This way, the root will more easily grow downwards.

Germinating cannabis seeds in soil/compost

Direct germination of marijuana seeds in the soil is a commonly used method. You don’t have to handle the fragile plant, so it is not disturbed in its growth process. However, the chances that the seeds will germinate are lower than when applying the other methods. When using this method, it is important to use good soil. You can inform yourself about the different types of soil at your local grow shop. Maintain an ambient temperature of at least 20 °C, otherwise, the seeds will not or not optimally germinate. Put the cannabis seed about 1 cm deep in the soil. Cover the hole with some soil and gently press.

The soil needs to be light so that the plant can easily grow to the surface. Solid soil is hard to penetrate for the roots and will cause a delay. The weed seeds will germinate under the ground and will come to the surface after 4 to 10 days. There are also more germination methods that can be applied.

How to germinate cannabis seeds in water

There are many methods of germinating cannabis seeds. Some are less risky and less complicated than others, so choosing the right approach is very important. In this article, we will look at a simple and effective method – germination in a glass of water.

What do weed seeds need to germinate?

Water, heat and air (oxygen) are all that cannabis seeds need to come out of dormancy and sprout. Fertilizer, special hormones, and secret supplements are not necessary as Mother Nature provides the seeds with a stored food supply to usher them through the germination. Strong, viable seeds germinate in two to seven days. As the seed germinates, the seed’s protective shell splits open and a tiny white rootlet (taproot) pops out.

See also  Top Shelf Cannabis Seeds

Germinating Weed Seeds in Water – Step by Step Guide

Germinating pot seeds in water is very simple and effective method that is highly recommended by FastBuds Seeds Company. This method is especially effective for seeds with a harder shell or older seeds. Here are all the steps for germinating pot seeds in water:

  1. Get a glass of water.
    You can use tap water or distilled water, whichever one you prefer. Just make sure to leave the glass of water at room temperature first. Do not use hot or cold water. Hot water can easily damage your seeds. Ideal temperature is around 21-26 C.
  2. Place the seeds in the glass.
    At first, seeds will often float on the surface. They should sink to the bottom of the container after a couple of hours. Soaking ensures that water penetrates the protective shell to activate growth hormones.
  3. Place the glass in a dark warm place and let the seeds soak.
    After a couple of days, you should see the radicle. Remember that some seeds may need longer until you see the radicle coming out. If they have not sprouted after 72 hours, add a few drops of hydrogen peroxide to kill accumulated bacteria in the water and return to the darkness for 2 more days.
  4. Plant your germinated seeds.
    When the taproot is around 2-3mm long, carefully get seeds out of the glass and plant them in soil. Make a 0.5-1cm deep hole in the soil, place your seed root pointing down and cover it with more soil. Lightly spray the area.

As you can see, germinating weed seeds in water is a super simple process. Now that you know the basics of germinating cannabis seeds in water it’s time to buy a few seeds and try out the process yourself. If you’re looking for high-quality seeds, head on over to Herbies where you can find viable, vigorous, and fast-growing seeds from a variety of seedbanks from around the world.

What kind of water should I use for cannabis seeds germination?

While you can always use tap water to germinate your seeds, using distilled or purified water can help you avoid any harmful substances that may be found in tap water, such as heavy minerals.

For how long do you leave cannabis seeds in water to germinate?

Usually it takes around 72 hours for the seeds to germinate. If the seeds haven’t sprouted in that time, you can add a few drops of hydrogen peroxide and leave them for another 2 days.

Can I germinate autoflower cannabis seeds in water?

Absolutely, you can. No matter what type of seeds you’ve purchased the germination process will be the same.

What if pot seeds float in water during germination?

Seeds that sink by soaking in water are generally considered as viable seeds, and those that don’t sink even after 24 hours of soaking are probably dead and hollow on the inside.

What water pH is best for the germination of weed seeds?

The perfect pH for cannabis seed germination is between 5.5-6.0.

Should I use hydrogen peroxide in water to germinate pot seeds?

According to recent studies, hydrogen peroxide solution is thought to increase germination rates and is therefore considered an effective medium for germination. Sprouting your seeds in a glass of water with a tablespoon of hydrogen peroxide mixed in can help sprout the seeds more efficiently as the solution breaks down the seed coat and allows more oxygen to get inside.

Should I use fertilizers or special hormones to germinate marijuana seeds in water?

Using special hormones or fertilizers to germinate weed seeds in water is not necessary.